Muyang MUZL350T Pelleting Machine

This pelleting machine mainly consists of a feeder, a conditioner and a principal machine of pellet mill (mainly including a main motor, an Assembly of rotor, a ring die, press rollers, an assembly of cutting knives and a lubrication system).

The principal machine is composed of main motor, magnetic plate, Assembly of rotor, pelletizing chamber (including assembly of press roller, assembly of front plat and ring die), machine body, door and so on, Fig 1.5 shows the section of MUZL350TA type pellet mill.

Working procedure:

The mash with water content less than 18% as required enters the feeding auger from the pelletizing chamber in a proper feeding amount through adjusting the rotating speed of the frequency control motor, and then enters the conditioner. The material will be sufficiently mixed with steam in the conditioner by stirring paddles of the conditioner, and molasses or oil can be added through the feeding inlet for molasses if necessary. The temperature of compound mash is normally controlled within 65~95℃and the humidity 14~17% based on different formulas, and finally the material enters the pelletizing chamber and is pelletized to pellets by the press rollers and the ring die.