Electric Installation on STHJ Paddle Molasses Mixer

The connecting wires from STHJ Series A Type Paddle Molasses Mixer to central control room must be placed in wire chases, and the central control room should be clean without any dirt or dust. Electric control for STHJ Series A Type Paddle Molasses Mixer refers to schematic diagram for electric control.

This feed machinery should be equipped with starting device, protective device and electric instrument with a corresponding power. The safety device for cleaning gate of STHJ Series A Type Paddle Molasses Mixer is controlled by a limit switch. The motor and electric control cabinet must be grounded well. The electric elements should be installed and used according to their operating instructions, it is required to run safely and reliably.

It is necessary to install a safety switch nearby the mixer (an emergency stop switch or a lock-up maintenance switch), for shutdown under an emergency condition. An over-voltage protection device should be provided for the user's power supply. The above schematic diagrams are only for the independent operation of the mixer, the interlocking of the mixer with its upstream and downstream processing equipment should be taken into account in process design. The customer should prepare two kinds of cables as follows for this equipment, and connect the motor and safety device to the central control room.

STHJ Series A Type Paddle Molasses Mixer

STHJ Series Type Paddle Molasses Mixer is widely used in feed, cereal, food, chemicals, medicine and pesticide industries, and suitable for mixing mash feeds (adding molasses) in feed mill, so that all the ingredients can be uniformly distributed and the quality of the compound feeds can be ensured.

STHJ Series Type Paddle Mixer is a horizontal continuous type mixer. It is featured of new rotor structure, good mixing homogeneity and no any dead angle during mixing. The clearance between the rotor and the machine casing is adjustable. It is equipped with a clearing gate to facilitate cleaning inside the working barrel. With a molasses intake in it, the machine is characterized by reasonable structure, handsome appearance, and easy operation and maintenance.

It is also important for the material characteristics, the particle size of intake ingredient particles should not exceed 8mm, and the bulk density is should be 0.15～0.8kg/dm. Also, the moisture should not exceed 18% with the molasses mixture temperature of 32~38℃. Relative humidity can't exceed 90%, and the elevation should not exceed 1000m. It is better for stable working voltage with a deviation not more than ±5%.

Muyang also provide you with steel silo project, you can visit our site and leave messages there.