Muyang Chaoyue SWFP Series Fine-grinding Hammer Mill

"Chaoyue" Series Fine-grinding Hammer mills can be used for grinding various granular feedstuffs, such as corn, sorghum, wheat, crumbled oil meals and etc. They are applicable for grinding granular raw materials in various large- and medium-sized livestock feed mills, alcohol plants, citric acid plants, food factories and cooking oil mills.

With advanced design of water-drop shaped grinding chamber and structural configuration for regrinding, it is good for increasing the machine's capacity. Optimized array of hammers makes the capacity higher. The design for air supplementing in axial direction effectively destroys the circumfluent material layer, it is of the benefit of grinding and screening, and it also do good to bearing cooling. Various accurate detection instruments including dynamic balancing device with high precision ensure much smoother running, lower noise level and more perfect performance.

The rotor on the hammer mill which is capable of both coronation and reversion greatly increases the service life of wearing parts. With the movable full-size access door and interlock device ensure safety and operational convenience. The coupled screen holding-down mechanism makes the screen segments be replaced conveniently and reliably. Equipped with the feeder of either advanced converter impeller type or automatic type, the grinding machinery works more reliably. The gap between hammers and screen can be adjusted to suit the highly efficient grinding of different materials. In order to bring the performance of the hammer mill into a full play, it is recommended that the feeding inlet size shall not be over 8mm and material moisture content shall not be more than 16%.

Muyang "Chaole" SWFL82B Vertical Pulverizer

SWFL82B vertical ultra-fine pulverizer is a new type of equipment for large-, medium- and small-sized feed mill to process various coarse ground materials after preliminary cleaning, magnetic separation and mixing, such as corn, sorghum, rice, wheat, soybean meal, fish and shrimp, so as to obtain the materials in superfine particle size as required. It is especially suitable for micro-grinding or superfine-grinding of feeds for prawn, turtle, eel and young animals.

Features of the product
1. It is characterized by compact structure and small floor space.
2. It is a structure without any sieve, both grinding and grading are put in the same closed space, so that the grading can be finished one time and the energy loss due to over-grinding can be reduced.
3. With a pneumatic opening mechanism, the grinding chamber can be quickly opened and ease of maintenance.
4. The grading system on the grinding machinery is an optimized design with high grading efficiency.
5. The particle size is uniform and adjustable, and the temperature of materials is lower by means of aspiration and pneumatic conveying.
6. The ground particle size of 60-200 mesh is continuously adjustable, so t he special requirements of ultra-fine pulverizer can be fulfilled.
7. A special silencer is equipped, which can greatly reduce noise.
8. Particular anti-bridging feeding device can protect feeding materials from bridging.
9. It runs stably with little vibration.
10. It is provided with temperature and speed indicators which can trace the actual running status of the pulverizer.

Working conditions
1. The ultra-fine pulverizer should be installed in basement or on the ground floor with ambient temperature of -5℃~40 ℃.
2. The ultra-fine pulverizer should be technologically matched with former and back equipment.
3. The working voltage on the grinding machine should be stable with a deviation no more than ±5%.
4. The diameter of materials entering the pulverizer should not exceed 1mm, and the moisture content should not exceed 12%.