Increasing aquaculture activity and growing consumption of fish resulting from rising consumer awareness about health benefits will continue to drive the demand for aqua-feed over next five years, with a predicted growth rate of 11.4% annually.
However, fluctuating prices of key ingredients used in manufacturing fish feed such as fish meal and fish oil is expected to cut margins of animal feed machines manufacturers and will affect the growth of the market adversely. Therefore, low-cost alternative, conventional and functional aqua-feed, is expected to help the market and industry players to take advantage of opportunities and cope with new challenge to grow sustainably in near future, particularly for Asia Pacific– the market where led 65% market share in the world.
Although extrusion is of good raw material adaptability and capable to process different materials, the understanding of the process is still very limited, and it is hard to find out suitable extrusion process parameters to ensure both feed quality and production output of a particular alternative recipe. For feed mills, the research usually depends on trial-and-error experiments and experience, and is a very expensive task in terms of time and raw material cost.
In Muyang, we not only develop new feed machines, make innovations on them, but also research improved methods, tools and experience for their new applications to meet new challenge and create consistent value in our customers' feed mills.
Showing posts with label Animal Feed Machines. Show all posts
Showing posts with label Animal Feed Machines. Show all posts
Thursday, November 6, 2014
Thursday, August 28, 2014
Personal Protection on Installing Machine
(1) All the mechanical equipments manufactured by Muyang are equipped with safety devices, which are consistent with modern technical level and universally effective safety rules prior to ex works, so that the customers can use the machines in accordance with the regulations.
(2) The enterprises are obligated to execute following regulations to guarantee operators' safety.
(3) The shield cap of belt and chain must be mounted at any moment and keep closing. It is very dangerous when they are opened or disassembled. It may cause casualty accident. This is also applicable for the preventive device of the manipulator.
(4) The safety limit switches should always be kept in good order. Overlap or discard of the safety limit switches is not allowed.
(5) The cover plate grating, grid bar or guard grating are usually installed and delivered together with the machine. They can only be disassembled with tools. And the machines with such kind of devices can never put into work until the above-said devices have been properly installed.
(6) The driving motor must be switched off completely to make the machine stop when carrying out inspection, commissioning, repair and maintenance. This can be done through a full-phase separating and lockable switch which is installed near the machine or on the operation desk, control panel on the site. It is not enough only to screw off the fuse wire!
(7) If the feed machine needs other energy like pneumatic, hydraulic, steam and hot water energy, it is necessary to cut off their energy supply or turn off the switch, and eliminate the pressure in the internal pipeline system of the machine.
(8) As for handling heated or cooled parts and components of the machine, especial care should still be taken for the danger of burning, to prevent any scald.
(9) If you have pressed the emergency stop switch to stop the machine and you want to reset the switch, so it is not permissible to only re-press this button to restart the machine. And the machine can only be started by re-closing the main switch first.
(10) If some feed machines are equipped with a local shutdown system, especial care should be taken. Read the instruction manuals attached with the machine carefully. In such machines with a local shutdown system, temperature will rise because pressure or vacuum will occur after they have been used for a period.
(11) If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid.
(12) The cleaning, lubricating and oiling of the machine or its parts and components may be carried out only when the machine is stopped. If you have to climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: the power supply of motors must be cut off completely and the switch must be locked, fix the rotor of the mixer before entering the mixer. Attention must be paid to safety measures for climbing.
(13) Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine.
(14) Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to prevent dust explosion.
(15) If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators.
(16) In production operation, the animal feed machines must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.
(17) Please execute the special regulations on accidents prevention in the operation manual provided by us.
(18) Only well trained workers can operate our machine.
(2) The enterprises are obligated to execute following regulations to guarantee operators' safety.
(3) The shield cap of belt and chain must be mounted at any moment and keep closing. It is very dangerous when they are opened or disassembled. It may cause casualty accident. This is also applicable for the preventive device of the manipulator.
(4) The safety limit switches should always be kept in good order. Overlap or discard of the safety limit switches is not allowed.
(5) The cover plate grating, grid bar or guard grating are usually installed and delivered together with the machine. They can only be disassembled with tools. And the machines with such kind of devices can never put into work until the above-said devices have been properly installed.
(6) The driving motor must be switched off completely to make the machine stop when carrying out inspection, commissioning, repair and maintenance. This can be done through a full-phase separating and lockable switch which is installed near the machine or on the operation desk, control panel on the site. It is not enough only to screw off the fuse wire!
(7) If the feed machine needs other energy like pneumatic, hydraulic, steam and hot water energy, it is necessary to cut off their energy supply or turn off the switch, and eliminate the pressure in the internal pipeline system of the machine.
(8) As for handling heated or cooled parts and components of the machine, especial care should still be taken for the danger of burning, to prevent any scald.
(9) If you have pressed the emergency stop switch to stop the machine and you want to reset the switch, so it is not permissible to only re-press this button to restart the machine. And the machine can only be started by re-closing the main switch first.
(10) If some feed machines are equipped with a local shutdown system, especial care should be taken. Read the instruction manuals attached with the machine carefully. In such machines with a local shutdown system, temperature will rise because pressure or vacuum will occur after they have been used for a period.
(11) If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid.
(12) The cleaning, lubricating and oiling of the machine or its parts and components may be carried out only when the machine is stopped. If you have to climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: the power supply of motors must be cut off completely and the switch must be locked, fix the rotor of the mixer before entering the mixer. Attention must be paid to safety measures for climbing.
(13) Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine.
(14) Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to prevent dust explosion.
(15) If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators.
(16) In production operation, the animal feed machines must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.
(17) Please execute the special regulations on accidents prevention in the operation manual provided by us.
(18) Only well trained workers can operate our machine.
Thursday, June 12, 2014
Muyang and Muyang Feed Machine
Muyang is pioneer in manufacturing, supplying and trading a wide assortment of Feed Machine. This Feed Machine is highly appreciated for their varied uses in suitable applications.
Keeping in mind the changing requirements of clients, we are involved in offering best quality of Animal Feed Machines. The Animal Feed Machine is known for their effective performance and high durability. These products are known for their various uses such as in cattle feed plants, poultry feed plants and in many other applications.
Muyang's feed machines mainly include grinding machine, mixing machine, pellet machine, extruder machine and other related machines on production line. Muyang is so well known as its large and full project line, and then in order to make customers feel easier in their projects, Muyang itself made and developed its feed machines introducing technology from abroad.
Keeping in mind the changing requirements of clients, we are involved in offering best quality of Animal Feed Machines. The Animal Feed Machine is known for their effective performance and high durability. These products are known for their various uses such as in cattle feed plants, poultry feed plants and in many other applications.
Muyang's feed machines mainly include grinding machine, mixing machine, pellet machine, extruder machine and other related machines on production line. Muyang is so well known as its large and full project line, and then in order to make customers feel easier in their projects, Muyang itself made and developed its feed machines introducing technology from abroad.
Subscribe to:
Posts (Atom)