Personal Protection on Installing Machine

(1) All the mechanical equipments manufactured by Muyang are equipped with safety devices, which are consistent with modern technical level and universally effective safety rules prior to ex works, so that the customers can use the machines in accordance with the regulations.
(2) The enterprises are obligated to execute following regulations to guarantee operators' safety.
(3) The shield cap of belt and chain must be mounted at any moment and keep closing. It is very dangerous when they are opened or disassembled. It may cause casualty accident. This is also applicable for the preventive device of the manipulator.
(4) The safety limit switches should always be kept in good order. Overlap or discard of the safety limit switches is not allowed.
(5) The cover plate grating, grid bar or guard grating are usually installed and delivered together with the machine. They can only be disassembled with tools. And the machines with such kind of devices can never put into work until the above-said devices have been properly installed.
(6) The driving motor must be switched off completely to make the machine stop when carrying out inspection, commissioning, repair and maintenance. This can be done through a full-phase separating and lockable switch which is installed near the machine or on the operation desk, control panel on the site. It is not enough only to screw off the fuse wire!
(7) If the feed machine needs other energy like pneumatic, hydraulic, steam and hot water energy, it is necessary to cut off their energy supply or turn off the switch, and eliminate the pressure in the internal pipeline system of the machine.
(8) As for handling heated or cooled parts and components of the machine, especial care should still be taken for the danger of burning, to prevent any scald.
(9) If you have pressed the emergency stop switch to stop the machine and you want to reset the switch, so it is not permissible to only re-press this button to restart the machine. And the machine can only be started by re-closing the main switch first.
(10) If some feed machines are equipped with a local shutdown system, especial care should be taken. Read the instruction manuals attached with the machine carefully. In such machines with a local shutdown system, temperature will rise because pressure or vacuum will occur after they have been used for a period.
(11) If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid.
(12) The cleaning, lubricating and oiling of the machine or its parts and components may be carried out only when the machine is stopped. If you have to climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: the power supply of motors must be cut off completely and the switch must be locked, fix the rotor of the mixer before entering the mixer. Attention must be paid to safety measures for climbing.
(13) Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine.
(14) Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to prevent dust explosion.
(15) If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators.
(16) In production operation, the animal feed machines must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.
(17) Please execute the special regulations on accidents prevention in the operation manual provided by us.
(18) Only well trained workers can operate our machine.

Muyang MJCC20 Alfalfa Highgrade Storage Device

Machineryshops.com is Muyang's e-commerce site, where customers find it easier, faster and more convenient to know Muyang products, make inquiries, purchase products and obtain services, thus enhancing customers' market competitiveness. There are many animal feed machines which can full meet your demands. Following is Muyang MJCC20 Herbage storage stabilizer:

***Include the housing, the rotary harrows, screw, chain, support, etc.
***With good appearance thanks to the horizontal structure.
***With special conveying chains, the discharging speed can be adjusted steplessly.
***With side inspection door, it is convenient for the daily maintenance and inspection.
***It is used in the processing of the Alfalfa, can supply the even materials flow for the downstream equipment, it also has the function of temporary stoarge and measurement.

President of Mozambique visits the Ulóngue feed mill under construction

on June 17, Mozambique President Armando Emilio Guebuza led a 50 members delegation to visit the under-constructed state-owned feed mill in Ulóngue (Tete), a turn-key project entrusted to Muyang.

The plant, incorporating complete process feed machine required with advanced technology and two 850 tons steel silos, is designed to produce five tones of mash feed per hour. Commissioning of this project is scheduled in November, and it is expected to be a “powerhouse” for the animal breeding in Tete area.

With this operation and other two projects under construction, a cotton processing factory and a 150 ton/day rice mill, the technology support Muyang delived to the growing Mozambique agricultural industry has extended to the fields of plant electrical system, grain handling and storage, grain drying tower, feed and rice milling projects, etc.

President Guebuza highly praised Muyang for the contribution it had made to Mozambique’s development, and hoped that the collaborating relationships with Muyang could deepen in the near future.

Aquatic Feed Production Line

Muyang know very well that in aquatic feed production process, in addition to a reasonable formulation, the very important point is that the technology process must be soft, thereby extending the feed water-solubility, which is very important for the health and growth of the aquatic animals.

How to choose a high-quality, low-cost high-grade fish feed, fish feed production process technology proposal? The key technology is the production technology, Muyang has the most experienced design engineers, providing reasonable recommendation, diversified technology production line solution.

How to choose the right crushing feed machine and optimized mesh system to improve grinding efficiency, reduce energy consumption? Muyang has the world's top grinding technology for you to create low-power and valuable grinding system.

Muyang extruding process is strictly customer value oriented. Fully automatic extruding technology, automatically microcomputer steam adding technology, precise control of sinking and floating material; computer control conditioning, "tiptronic" better control the degree of curing, elevating ripening degree and improving digestion and absorption rate.

Cooking molding extrusion or extruding molding pellet technology, and pre-conditioning process are final conditioning technology will together determine the characteristics of the final product. Muyang will provide you with the best technology and products to help you get high-quality aquatic feeds.

By use of Muyang extruding and pelleting technique, you can minimize costs while ensure optimal product quality and maximize revenue. In the meantime, you can produce more optimal feed with maximum feed digestibility and feed conversion ratio and animals' overall health is improved.

Electric Installation on STHJ Paddle Molasses Mixer

The connecting wires from STHJ Series A Type Paddle Molasses Mixer to central control room must be placed in wire chases, and the central control room should be clean without any dirt or dust. Electric control for STHJ Series A Type Paddle Molasses Mixer refers to schematic diagram for electric control.

This feed machinery should be equipped with starting device, protective device and electric instrument with a corresponding power. The safety device for cleaning gate of STHJ Series A Type Paddle Molasses Mixer is controlled by a limit switch. The motor and electric control cabinet must be grounded well. The electric elements should be installed and used according to their operating instructions, it is required to run safely and reliably.

It is necessary to install a safety switch nearby the mixer (an emergency stop switch or a lock-up maintenance switch), for shutdown under an emergency condition. An over-voltage protection device should be provided for the user's power supply. The above schematic diagrams are only for the independent operation of the mixer, the interlocking of the mixer with its upstream and downstream processing equipment should be taken into account in process design. The customer should prepare two kinds of cables as follows for this equipment, and connect the motor and safety device to the central control room.

Operation and Attention Points

When you first operate the feed machine, there are some necessary tips you should notice, so that you can avoid some unexpected problems. Following are some simple points when you are operating the machine,just remember it.

***Check the immobility of the bolt connection.
***Run idle before feed, check whether all parts of the machine are normal.
***If the pulley wheel doesn’t work or jams, it must be dismounted and inspected. Please refer to the schematic diagram of the pulley wheel when disassembly.
***In order to avoid machine damage and accidents, the big iron block and hard block are strictly forbidden to enter in the machine.
***Keep the machine running for 5-8 minutes after stop feeding, empty the residual materials in the drum.
***If the cooler and equipments need to be combined as a product line, it needs to start the rear equipments and then start the front equipments according to the order. Stop the machine in reverse order. It also can adopt the interlock control system.

Size Differences Between Feed Pellets

The preference of good-looking products on the fiercely competing market have had feed machinery manufactures pay more attentions to the appearance quality of extruded feed pellets.

Muyang therefore in here offers some operational tips to help eliminate appearance problems and add value to feed extrusion productions, with the support of our experienced service technicians. The most common problems on the appearance of extruded feed are size difference, irregular shape, and poor pellet surface smoothness.

Size difference

Size differences between feed pellets are inevitable in extrusion productions. An acceptable range therefore is defined to identify whether a pellet is qualified in size or not. Pellets that size in the range are “uniform” and qualified, while out of the range are nonconforming products and should not be delivered to customers.

For example, feed pellets that extruded out from 3.0mm die openings if ranging from 4.2mm to 5.0mm are acceptable, while of 3.5mm or φ6.0mm diameter is unacceptable. Therefore, to control extrusion process and prevent nonuniform finished pellets from production is very important.