Operation and Attention Points

When you first operate the feed machine, there are some necessary tips you should notice, so that you can avoid some unexpected problems. Following are some simple points when you are operating the machine,just remember it.

***Check the immobility of the bolt connection.
***Run idle before feed, check whether all parts of the machine are normal.
***If the pulley wheel doesn’t work or jams, it must be dismounted and inspected. Please refer to the schematic diagram of the pulley wheel when disassembly.
***In order to avoid machine damage and accidents, the big iron block and hard block are strictly forbidden to enter in the machine.
***Keep the machine running for 5-8 minutes after stop feeding, empty the residual materials in the drum.
***If the cooler and equipments need to be combined as a product line, it needs to start the rear equipments and then start the front equipments according to the order. Stop the machine in reverse order. It also can adopt the interlock control system.

Size Differences Between Feed Pellets

The preference of good-looking products on the fiercely competing market have had feed machinery manufactures pay more attentions to the appearance quality of extruded feed pellets.

Muyang therefore in here offers some operational tips to help eliminate appearance problems and add value to feed extrusion productions, with the support of our experienced service technicians. The most common problems on the appearance of extruded feed are size difference, irregular shape, and poor pellet surface smoothness.

Size difference

Size differences between feed pellets are inevitable in extrusion productions. An acceptable range therefore is defined to identify whether a pellet is qualified in size or not. Pellets that size in the range are “uniform” and qualified, while out of the range are nonconforming products and should not be delivered to customers.

For example, feed pellets that extruded out from 3.0mm die openings if ranging from 4.2mm to 5.0mm are acceptable, while of 3.5mm or φ6.0mm diameter is unacceptable. Therefore, to control extrusion process and prevent nonuniform finished pellets from production is very important.

Muyang and Muyang Feed Machine

Muyang is pioneer in manufacturing, supplying and trading a wide assortment of Feed Machine. This Feed Machine is highly appreciated for their varied uses in suitable applications.

Keeping in mind the changing requirements of clients, we are involved in offering best quality of Animal Feed Machines. The Animal Feed Machine is known for their effective performance and high durability. These products are known for their various uses such as in cattle feed plants, poultry feed plants and in many other applications.

Muyang's feed machines mainly include grinding machine, mixing machine, pellet machine, extruder machine and other related machines on production line. Muyang is so well known as its large and full project line, and then in order to make customers feel easier in their projects, Muyang itself made and developed its feed machines introducing technology from abroad.

Properties of Steel Materials

Most of steel characteristics depends on its various applications. Because steel is used for construction, the engineer emphasis on the steel properties, such as tensile strength, bending strength, elasticity and ect. In addition to the general characteristics such as density, these features can also be used to judge the quality of the steel structure. Only use high-quality steel, can steel building have a long life.

Characteristics of steel structures

There are many impacts on steel materials and just use of these features in the construction industry, the steel is manufactured into various shapes.

Density

Mass per unit volume of material is referred to as its density. Steel density ranges from 7.85 g / cc - 8.1 g / cc.

Thermal Properties

Austenitizing temperature and the melting temperature is an important thermal properties of the steel. Iron is converted to the temperature of the austenite crystal is called the austenitizing temperature, the temperature is usually 900 ° C. Iron can be increased to reduce the carbon austenitizing temperature; eutectic steel austenitizing temperature 724 ° C. Ordinary carbon steel melting point 1130 ° C, and the melting point of pure steel to 1492 ° C.

Tension

This property is a limit of steel which can be stretched without breaking balance. Breaking point used to measure the tension steel. When given at the breaking point continues to increase tension steel, steel will break. Compared to other building materials, steel has the strongest tension.

Bending strength

Minimal force deformation properties of the steel are known to resist bending resistance strength, deformation may occur is that the steel yield strength of the steel size. When deformed steel, structural steel and crystal structure of an atom will also change.

Elasticity

Elastic properties of the steel yield strength should be distinguished. When the steel is deformed under pressure occurs, the elastic deformation limit of the measurement points to be determined for the material, the Young's modulus of elasticity of the material used to measure flexibility.

Shape properties of steel structures

Different shapes depends to the needs of steel construction projects. L-, I-, Z-type, T-type structure are just some of the commonly used in the construction industry for supporting shape. I-beam shape is the largest steel works used in the design will take into account the different performance and specifications. When it comes to the stability of steel, to prevent unnecessary vibration is one of the key areas need to be considered. Stiffness properties help to reduce these vibrations. Use the right amount of stiffness and mass of steel components, structure minimizes vibration can. Therefore, the correct choice is to prevent future structural steel rigid structural deformities key step. Shepherd Group to provide customers with high-quality steel engineering services, given the optimal solutions based on customer requirements.